铂电阻温度计自动标定系统设计  

Design of the Automatic Calibration System for Platinum Resistance Thermometer

作　　者：蒋博[1] 丁炯[1] 李锦花[2] 陈丹超[2] 叶树亮[1] 

机构地区：[1]中国计量学院工业与商贸计量技术研究所,浙江杭州310018 [2]宁波出入境检验检疫局技术中心,浙江宁波315012

出　　处：《自动化仪表》2016年第5期71-74,共4页Process Automation Instrumentation

基　　金：浙江省科技计划基金资助项目(编号:2014C33114);国家质检总局科技计划基金资助项目(编号:2014IK075)

摘　　要：针对传统铂电阻温度计标定方法工作量大、效率低的问题,设计了一套基于计算机的自动标定系统。系统采用VB6.0作为软件开发平台,编程实现计算机对温度源、标准温度计的自动控制、数据采集及存储,同时调用Excel进行温度计标定数据的自动拟合。根据标定设备的硬件配置,计算得到系统的不确定度小于0.02℃。实验结果表明,在-40~150℃的标定温度范围内,标定后的温度计测量误差小于±0.03℃。Aiming at the problems of large amount of labor and low efficiency in the traditional calibration method of platinum resistance thermometer,an automatic calibration system is designed based on computer. The system adopts VB6.0 as the software development platform,the automatic control, data acquisition and storage of temperature source and standard thermometer are realized by programming in computer ; and the calibration data of thermometer are automatically fitted by calling Excel. Depending on the hardware configuration of calibration device, the uncertainty of the system is less than 0.02℃, and the experimental results indicate that the measurement error of the calibrated thermometer is less than ±0.03℃ within in the calibration temperature range of -40 - 150℃.

关 键 词：铂电阻温度计 色谱仪 传感器 信号调理电路 A/D转换器 自动标定 VB6.0 不确定度 

分 类 号：TH811[机械工程—仪器科学与技术] TP273[机械工程—精密仪器及机械]