丙烯腈接枝三元乙丙橡胶共聚物增容三元乙丙橡胶/丁腈橡胶共混胶的性能  

Properties of ethylene-propylene-diene monomer/nitrile rubber blends compatibilized with acrylonitrile grafted ethylene-propylene-diene monomer copolymer

作　　者：朱宝宁 李方山[2] 章于川[2] 

机构地区：[1]安徽中鼎密封件股份有限公司,安徽宁国242300 [2]安徽安大中鼎橡胶技术开发有限公司,合肥230038

出　　处：《合成橡胶工业》2016年第3期212-216,共5页China Synthetic Rubber Industry

摘　　要：采用溶液接枝聚合法制备了丙烯腈(ACN)接枝三元乙丙橡胶(EPDM)共聚物(PAN-gEPDM),考察了其接枝率及用量对EPDM/丁腈橡胶(NBR)共混胶物理机械性能和耐油性能的影响,并表征了PAN-g-EPDM及其增容EPDM/NBR共混胶。结果表明,ACN单体与EPDM主链发生了接枝反应,得到了不同接枝率的PAN-g-EPDM,其具有不同的热分解温度和玻璃化转变温度;当加入6份接枝率为26%的PAN-g-EPDM时,共混胶的物理机械性能及耐油性能较佳;PAN-g-EPDM可起到增容作用,使NBR相和EPDM相的相容性得到改善。The acrylonitrile （ACN） grafted ethyl- ene-propylene-diene monomer （ EPDM ） copolymer （PAN-g-EPDM） was prepared by solution graft co- polymerization, effects of grafting ratio and amount of PAN-g-EPDM on the mechanical properties and oil resistance of EPDM/nitrile rubber（NBR） blends were investigated, and the PAN-g-EPDM and the blends compatibilized with PAN-g-EPDM were char- acterized. The results showed that the PAN-g-EPDM with different ACN monomer grafting grafted ratio were prepared by the onto EPDM successfully, and the prepared graft copolymer had different thermaldecomposition temperature and glass-transition tem- perature. The mechanical properties and oil resist- ance of the compatibilized EPDM/NBR blends were better when the PAN-g-EPDM with grafting ratio of 26% was 6 phr. As a compatibilizer, PAN-g-EPDM improved the compatibility of EPDM and NBR phase.

关 键 词：溶液接枝聚合法 丙烯腈接枝三元乙丙橡胶共聚物 增容 三元乙丙橡胶 丁腈橡胶 共混 物理机械性能 耐油性能 

分 类 号：TQ333.4[化学工程—橡胶工业]