原位聚合纳米SiO_2法超支化CPAM的制备及其对纸张的增强作用  

Preparation of Nano-SiO_2 Modified Branched Cationic Polyacrylamide and Its Application as Paper Strengthening Agent

作　　者：张宏伟[1] 赖秋杰 肖欣蓉 

机构地区：[1]华南理工大学制浆造纸工程国家重点实验室,广东广州510640

出　　处：《中国造纸》2016年第5期11-15,共5页China Pulp & Paper

基　　金：国家"973"计划项目(2010CB732206)

摘　　要：选用季戊四醇(PETL)为多官能团支化剂,硝酸铈铵为引发剂,甲基丙烯酰氧乙基三甲基氯化铵(DMC)为阳离子单体,与丙烯酰胺(AM)在水溶液中发生自由基反应合成支化结构的阳离子聚丙烯酰胺(BCPAM)后,再加入正硅酸乙酯(TEOS)水解原位产生纳米SiO_2,在BCPAM分子中产生物理交联,制备超支化阳离子聚丙烯酰胺(SiO_2-BCPAM),研究了其作为纸张增强剂对纸张的增强作用,通过红外光谱(FT-IR)和扫面电镜(SEM)对产物的结构和特性进行表征。结果表明,所合成的产物为SiO_2-BCPAM杂化材料;引发剂、TEOS用量和反应时间影响SiO_2-BCPAM相对分子质量或分子链的形态进而影响其特性黏度;SiO_2-BCPAM对纸张增强效果明显,当其用量为0.5%(对绝干浆)时,纸张的抗张指数、耐破指数和撕裂指数比空白纸样分别提高了23.6%、12.4%和25.5%。Branched cationic polyacrylamide （BCPAM） was synthesized via free-radical solution polymerization of acrylamide （AM） and methacrylatoethyl trimathyl ammonim chloride （DMC） （DMC） by using pentaerythritol （PETL） as the core molecule and ceric ammonium nitrate （Ce4＋ ） as the initiator. The Nano-SiO2 was produced in BCPAM by hydrolysis of tetraethyl orthosilicate （TEOS） in situ and the re- sulted SiO2 interacted with BCPAM through physical crosslinking. The structure of SiO2-BCPAM was characterized by Fourier transform infra- red spectroscopy （Fr-IR） and scanning electron microscopy （SEM）. The study results indicated that the initiator concentration, TEOS dos- age and reaction time influenced the molecular weight or chain aggregation, and then the intrinsic viscosity. The SiO2-BCPAM exhibited sig- nificant paper strengthening performance. For instance, when the dosage of SiO2-BCPAM was 0.5% （based on oven dried pulp）, the dry tensile index, burst index and tear index of the hand sheet were increased by 23.6%, 12.4% and 25.5% respectively.

关 键 词：阳离子聚丙烯酰胺 超支化 原位聚合 纸张 增强剂 

分 类 号：TS727[轻工技术与工程—制浆造纸工程]