检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
机构地区:[1]中汽迈赫(天津)工程设计研究院有限公司,天津300202 [2]迈赫机器人自动化股份有限公司,山东潍坊262200
出 处:《建筑技术开发》2016年第4期28-32,共5页Building Technology Development
摘 要:本文采用通风软件AirPak 3.0建立物卵模型和数学模型,模拟地板送风系统供冷运行和供热运行的室内空调环境研究不同送风温度和不同送风量对地板送风空调房间速度分布、温度分布、热舒适性和空气品质的影响。结果表明:供冷运行时房间设定温度为26℃,送风温度为18~19.5℃,热力分层良好,热舒适性适中,可作为空调系统运行的最佳工况;供热运行时,房间设定温度为18℃,送风温度为28~30℃时,温度分布趋势接近理想采暖要求,能够满足人体的热舒适需求。This paper established the physical model and mathematical model by AirPak 3.0, simulated the air-conditioned indoor environment under cooling and heating operating conditions, analysed the influence of different supply air temperatures and different sup- ply air volume on the velocity distribution, temperature distribution, thermal comfort and air quality of UFAD air-conditioned room. The results showed that: under cooling operating condition, good thermal stratification and thermal comfort can be reached when the room temperature is 26 ~C and the supply air tempera^tre is 18 - 19.5 ℃ , which can be regarded as the best operating condition; under heating operating condition, when the room temperature is 18 ℃ , supply air temperature is 28 - 30 ℃ , the temperature distribution became good enough to meet the needs of the body's thermal comfort.
分 类 号:TU834.3[建筑科学—供热、供燃气、通风及空调工程]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.13