LD抽运主振荡功率放大结构4.1kW全光纤激光器  

Laser Diode Pumped 4.1 kW All-Fiber Laser with Master Oscillator Power Amplification Configuration

作　　者：王小林[1] 张汉伟[1] 陶汝茂[1] 粟荣涛[1] 周朴[1] 许晓军[1] 

机构地区：[1]国防科学技术大学光电科学与工程学院,湖南长沙410073

出　　处：《中国激光》2016年第5期7-11,共5页Chinese Journal of Lasers

基　　金：国家自然科学基金(61505260)

摘　　要：利用半导体激光器(LD)抽运大模场增益光纤实现了输出功率大于4kW的主振荡功率放大结构全光纤激光器。实验研究了增益光纤纤芯直径和抽运波长不同情况下激光器的受激拉曼散射(SRS)和横向模式不稳定(TMI)特性。为了抑制SRS,选择纤芯为30μm的大模场掺镱光纤作为增益介质;为了抑制光纤放大器中的TMI,利用增益光纤吸收系数较低波段对应的915nm LD作为抽运源,将增益光纤弯曲半径降低到10cm以提高高阶模的损耗。在种子功率为100 W、最高注入抽运功率为5.3kW时获得了4.1kW的功率输出,光束质量M2为2.2,输出激光中无SRS和TMI现象。A laser diode（LD）pumped all-fiber laser with master oscillator power amplification configuration is demonstrated,of which output power is more than 4kW.The stimulated Raman scattering（SRS）and transverse mode instability（TMI）charateristics of lasers are experimentally studied under different core-diameter gain fibers and different pump wavelengths.In order to mitigate SRS,a large mode area Yb^3＋doped fiber with core diameter of30μm is selected as gain media.In order to suppress TMI,LD with center wavelength of 915 nm is used as pump source,so the absorption coefficient of the gain fiber is lower at 915 nm,and the bending radius of the gain fiber is reduced to 10 cm to increase the loss of the higher modes.When the seed power is 100 W,the highest pump power is 5.3kW,the laser power of 4.1kW is achieved,and the beam quality M^2 is 2.2.There are no SRS and TMI effects observed in the output laser.

关 键 词：激光器 光纤激光器 主振荡功率放大 受激拉曼散射 横向模式不稳定 

分 类 号：TN248[电子电信—物理电子学]