检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:罗家威 郑占申 何盼盼 王希月 邢云青 于金柱 闫树浩
机构地区:[1]华北理工大学材料科学与工程学院,河北省无机非金属材料重点实验室,河北唐山063009
出 处:《中国陶瓷工业》2016年第2期6-10,共5页China Ceramic Industry
基 金:国家自然科学基金资助项目(51102076);华北理工大学大学生创新计划项目
摘 要:以碳酸钡、二氧化锆、二氧化钛等为原料,以Sm_2O_3为掺杂剂和掺杂量为0.5mol%Y_2O_3的锆钛酸钡陶瓷材料为研究对象,采用传统固相法分别于1250℃、1280℃、1300℃、1330℃下制备了陶瓷样品,研究Sm_2O_3加入物对体系介电性能和微观形貌的影响。结果表明,Sm^(3+)掺杂后的陶瓷样品主晶相不变,均为钙钛矿结构;掺杂能起到改善介电常数与介电损耗的作用,随着Sm_2O_3掺杂量的增加,陶瓷样品的介电常数最高至6623.49,而介电损耗最低至0.0145;掺杂还可以改变BZT陶瓷的介电性能,居里温度向室温方向移动,当Sm_2O_3掺杂量x=0.005 mol时,陶瓷样品的介电性能最好。The ceramic samples were prepared respectively by the conventional solid phase method at the temperatures of 1250 ℃, 1280 ℃, 1300 ℃ and 1330 ℃, using Ba CO3, Zr O2, Ti O2, Yb2O3 and Sm2O3. The influence of doping amount of Sm2O3 on the dielectric properties and morphology of the ceramic was investigated when there was 0.5 mol%Y2O3. The experimental results show that the main phase of ceramic samples doped with Sm^(3+) remains unchanged, all of perovskite structure. With the increase of the doping amount of Sm2O3, the dielectric constant of ceramic samples is up to 6623.49, while the lowest dielectric loss is up to 0.0145. Doping can also change the dielectric properties of BZT ceramics, making Curie temperature move to room temperature.When the doping amount of Sm2O3 is 0.005, the dielectric properties of ceramic samples is the best.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.15