聚合物改性水泥砂浆层与混凝土结合面抗剪性能试验研究  

Experimental Investigation on Shearing Behavior Between Polymer Mortar and Concrete

作　　者：李淼[1] 廖维张[1] 王波[1] 

机构地区：[1]北京建筑大学工程结构与新材料北京市高等学校工程研究中心,北京100044

出　　处：《施工技术》2016年第10期86-90,共5页Construction Technology

基　　金：国家自然科学基金项目(51378046);北京市属高等学校人才强教资助项目(067135300100);北京市属高等学校高层次人才引进与培养计划项目资助

摘　　要：聚合物改性水泥砂浆层(文中简称聚合物砂浆层)与原混凝土结合面的有效黏结,是二者协同工作、结合面应力有效传递的前提,是加固层性能充分发挥的关键。通过对33个试件的双面剪切试验,探讨了剪切强度的影响参数分析了聚合物砂浆层与混凝土结合面的黏结剪切性能。试验结果表明:聚合物砂浆层与混凝土结合面的剪切强度主要取决于砂浆强度;黏结面积大于150mm×100mm时,剪切强度基本不受黏结面积变化影响;加载速率变化对界面剪切强度的变化作用显著;加载速率的增加有利于提高结合面剪切强度,但在动力加载时应充分考虑结合面内力的加载速率增大效应。The effective bonding between the polymer modified mortar layer and the original concrete is the prerequisite of the cooperation between the two parts and effective stress transmission in the binding interface,which is critical to the quality of the strengthening layer. Based on the double shear tests of 33 test specimens,in this paper,by the method of discussing the influence parameters of shear strength,the bond performance between polymer mortar layer and original concrete were analyzed. The results show that the shear strength is mainly determined by the strength of mortar; when the bond area is bigger than150 mm × 100 mm,it almost has no effect on the bond shear strength. And different loading rate has a significant effect on the shear strength. Increasing the loading rate is beneficial to the improvement of the shear strength of the binding interface,but under dynamic load,the amplified effect of the high loading rate on the internal force should be considered.

关 键 词：聚合物改性水泥砂浆 结合面 双剪试验 剪切强度 

分 类 号：TU502.6[建筑科学—建筑技术科学]