激光功率对透平叶片激光熔覆Ni基合金涂层裂纹的影响  

Influence of Laser Power on Crack of Laser Cladding Ni-based Alloy Coating on Turbine Blade

作　　者：付福兴[1] 

机构地区：[1]西安文理学院机械与材料工程学院陕西省表面工程与再制造重点实验室,陕西西安710065

出　　处：《热加工工艺》2016年第10期173-174,177,共3页Hot Working Technology

基　　金：陕西省西安市科技计划创新基金"文理专项"(CXY1352WL02)资助项目

摘　　要：以透平叶片常用的2Cr13马氏体不锈钢为基底材料,以Ni基合金粉末为熔覆材料进行了激光熔覆试验。获取了不同激光功率下的熔覆层,并对熔覆层表面的裂纹分布特性进行了分析。结果表明,Ni基合金粉末能有效改善熔覆层的裂纹率。随激光功率的增大,熔覆层的裂纹率逐渐降低,裂纹的宽度也随之变小。The Ni based alloy powder was cladded on the surface of base material （2Cr13） used in the turbine blades by laser cladding. The cladding layer under different laser powers can be obtained, and the characteristic of the distribution of the crack on cladding layer surface was analyzed. The results show that the crack ratio of the laser cladding layer improves by Ni based alloy powder. The crack ratio of the cladding layer decreases gradually with the increase of laser power. In the mean time, the width of the crack decreases.

关 键 词：激光熔覆 NI基合金涂层 激光功率 裂纹率 

分 类 号：TG146.21[一般工业技术—材料科学与工程]