正交试验法研究纺丝条件对中间相沥青碳纤维直径的影响  

Investigation of effect of spinning conditions on diameter of mesophase pitch-based carbon fiber by taguchi experimental design

作　　者：姚祥栋 欧阳婷[1] 费又庆[1,2] 蒋朝[1] 

机构地区：[1]湖南大学材料科学与工程学院,长沙410082 [2]湖南大学汽车车身先进设计与制造国家重点实验室,长沙410082

出　　处：《化工新型材料》2016年第5期136-138,141,共4页New Chemical Materials

摘　　要：利用Taguchi正交试验方法探讨了沥青基碳纤维纺丝过程中影响纤维直径的纺丝工艺因素及其规律,结果表明:以纺丝温度、纺丝压力、卷筒转速和喷丝孔入口角等4个重要的纺丝工艺条件为考察因素时,卷筒转速是影响中间相沥青基碳纤维直径变化最重要的因素。中间相沥青基碳纤维直径随着喷丝孔入口角的增大而减小;随着纺丝温度的升高而增大;随着转速增大而明显减小。Taguchi experimental design was employed to investigate the influences of fiber spinning conditions on the diameter of mesophase pitch-based carbon fibers（MPCF）.The research results showed that the spinning speed was the most important factor to affect the diameter of MPCF.With the increasing of winding speed and the entry angle of spinneret die,the diameter of MPCF decreased significantly.Also,as spinning temperature decreased,the diameter of MPCF also decreased.For the mesophase pitch studied here,spinning pressure only had marginal effect based on the taguchi statistical analysis.

关 键 词：中间相沥青基碳纤维 Taguchi正交试验 纺丝 

分 类 号：TQ342.742[化学工程—化纤工业]