检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
机构地区:[1]重庆水轮机厂有限责任公司,重庆400054 [2]国电大渡河流域水电开发有限公司,四川成都610016 [3]西华大学能源与动力工程学院,四川成都610039 [4]黄河水利职业技术学院水利系,河南开封475004
出 处:《水力发电》2016年第6期49-52,共4页Water Power
基 金:国家自然科学基金资助项目(51379179);河南省高等学校青年骨干教师资助项目(2013GGJS-197)
摘 要:意大利某水电站更换转轮后,发现当其在高水头、大开度且以双喷嘴方式运行时,水轮机效率随着喷针开度的增加(尚未开到额定开度值)却意外下降了5%。针对该问题,运用了CFD软件对包括转轮、喷嘴、机壳、机盖等在内的水轮机内部流场进行了非定常气水两相流数值模拟,分析确定了水轮机效率下降的原因。随后提出了对该水轮机增设挡水板的改进方案。计算结果表明,该改进方案阻止了水流再次返回至转动区域,水轮机效率下降问题得到了解决。After replacing the runner of Pelton turbine in an Italian hydropower station with Chinese production,the efficiency of turbine decreases by 5% with the increasing of needle opening which still below rated opening when the turbine operates at high water head,big opening and double nozzle mode during on-site performance acceptance test.For solving this problem,the CFD software is used to simulate the internal flow field of unsteady gas-water two-phase flow of turbine including runner,nozzle,casing and machine cover,and the reasons of efficiency decrease is analyzed.The improvement scheme of adding baffle plate is proposed.The simulation results show that the improvement can prevent water flowing back to rotating parts and the efficiency decrease is resolved.
关 键 词:水力机械 冲击式水轮机 喷嘴 性能试验 数值模拟
分 类 号:TK735[交通运输工程—轮机工程]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.31