旋流式冲蚀磨损试验机的设计及实验研究  

Design and Experimental Investigation of a Swirl Slurry Erosion Tester

作　　者：任杰[1] 陈华辉[1] 赵赋[1] 杜飞[1] 赵庆朝 卢志鹏[1] 

机构地区：[1]中国矿业大学(北京)机电与信息工程学院,北京100083

出　　处：《润滑与密封》2016年第6期9-13,34,共6页Lubrication Engineering

基　　金：国家自然科学基金项目(51275516)

摘　　要：为模拟重介旋流器工况,合理评定内衬材料耐磨性,在旋转式浆体冲蚀磨损试验机的基础上,通过改进搅拌系统和试样安装方式,设计一种旋流式冲蚀磨损试验机。该试验机通过不锈钢＋尼龙叶片二级搅拌系统实现了对浆料的均匀搅拌,在料桶内壁安装试样模拟了重介旋流器物料对内衬材料的冲蚀磨损工况,试验冲蚀角度范围为0°-90°。通过流体力学计算得出浆料对试样的冲蚀速度可达2.4 m/s,对纯铝的冲蚀磨损试验表明,试验机的数据重现性误差小于16%,稳定性误差小于17%。In order to simulate the operating condition of dense medium cyclone and reasonably evaluate the wear resist-ance of lining materials, a swirl slurry erosion tester was designed by modifying the slurry stir system and the specimen in-stallation mode of traditional slurry erosion tester. In the swirl slurry erosion tester, the uniform slurry flow was obtained byusing stirrer composed of stainless and nylon two level blades, and the operating environment of dense medium cyclone lin-ing materials could be simulated by fixing the specimens on the inner surface of the barrel. The impact angle ranges of theswirl slurry erosion tester is from 0° to 90°,the slurry impact velocity can reach 2- 4 m/ s by hydromechanics calculating.The results of slurry erosion experiments for aluminum show that the data repeatability error of the swirl slurry erosion testeris less than 16%,and the data stability error is less than 17%.

关 键 词：浆体冲蚀 重介旋流器 冲蚀速度 冲蚀角度 

分 类 号：TG115.5[金属学及工艺—物理冶金]