笼型异步磁力耦合器机械特性与试验  

Mechanical properties and testing for squirrel cage asynchronous magnetic coupler

作　　者：葛研军[1] 袁直[1] 贾峰[2] 杨均悦[1] 周凯凯[1] 

机构地区：[1]大连交通大学机械工程学院,大连116028 [2]中车大连机车车辆有限公司,大连116022

出　　处：《农业工程学报》2016年第12期68-74,共7页Transactions of the Chinese Society of Agricultural Engineering

基　　金：国家自然科学基金资助项目(51285092);辽宁省科技计划项目(2010220004);大连市科技计划项目(2013A16GX109)

摘　　要：为有效解决目前机械传动系统中选用电机时功率裕度过大而普遍存在的能源利用效率较低问题,提出一种基于三相异步电机鼠笼转子的异步磁力耦合器(squirrel cage asynchronous magnetic coupler,SCAMC)。结合SCAMC具体结构特点,采用标量磁位法及二维场边界条件,建立气隙磁场数理模型;在气隙磁通密度中引入时间变量,推导出感生电流随时间变化的表达式;基于电流叠加性,将笼条电流折算到转子表面,并沿圆周方向对感生电流所形成的洛伦兹力进行积分,建立了SCAMC的电磁转矩模型。基于上述理论及技术基础,设计并制造出一台37 k W SCAMC样机,并对其机械特性进行理论计算、仿真验证及试验测试。结果表明:转差率相同时,所得的仿真及试验数据与理论计算值相比,误差不超过5%;SCAMC与同容量的三相异步电机相比,线性工作区更宽,过载能力更强,但其机械特性偏软,可有效缓解负载对电机的冲击。该研究可为磁力耦合器在大惯量、难启动及经常性过载机械设备中的应用提供参考。In order to effectively solve the problem of the motor＇s power margin too adequate to ensure the stable operation of the equipment which widely exists in the current mechanical transmission system, a kind of squirrel cage asynchronous magnetic coupler（SCAMC） is proposed based on the principle of three-phase asynchronous motor. The SCAMC has the advantages of the simplicity of mechanical structure, high reliability in successive operation, simple maintenance, weak skin effect of the squirrel cage rotor and adjustable slip ratio and so on. According to the specific characteristics of the SCAMC structure, the mathematical model of air gap magnetic flux density is established by using the scalar magnetic potential method and two-dimensional field boundary conditions. The air gap magnetic flux density generated by the permanent magnet in SCAMC can be decomposed into radial component and tangential component, and it is only the former one that cuts the cage bar and generates induction current and electromagnetic torque. As a consequence, the effect of tangential air gap flux density can be ignored when studying the operating characteristics of SCAMC; only the radial air gap magnetic flux density needs analysis. The time variable is introduced into the expression of radial air gap flux density, and thus the expression of induced current changing over time is deduced and the transformation rule of induced current with space phase and electrical angle is revealed. Based on the current＇s superposition characteristics, the current of the cage bar is converted onto the rotor surface and the Lorentz force produced by induced current is integrated along the circumference, and thus the electromagnetic torque model is established. On the base of the above theoretical and technological foundation, a 37 kW SCAMC experimental prototype is designed and produced. After installing the prototype on a 37 kW, 6-pole drive motor, the theoretical calculation, simulation verification and experiment measurement on its mechanical beha

关 键 词：机械化 模型 试验 磁力耦合器 鼠笼转子 机械特性 电磁转矩 标量磁位 

分 类 号：TH132[机械工程—机械制造及自动化]