超高层建筑低位顶升模架体系应用  

APPLICATION OF LOW-ALTITUDE JACKING FORMWORK SYSTEM OF SUPER-HIGH BUILDING

作　　者：王军[1] 钟学宏 赵军 黄亚均 顾乃荣 徐建彬 

机构地区：[1]江苏大学土木工程与力学学院,江苏镇江212013 [2]中建三局第三建设工程有限责任公司,武汉430073 [3]上海建科工程咨询有限公司,上海200032

出　　处：《建筑技术》2016年第6期537-540,共4页Architecture Technology

摘　　要：某工程总建筑面积39.5万m^2,由地下室、商业裙房、东塔楼和西塔楼组成。塔楼核心筒竖向剪力墙结构施工中采用低位顶升模架体系,为保证该模架体系安全运行,预防事故发生,采取了建立顶模运行管理体系、完善顶模体系使用维护、加强顶模运行过程控制等施工管理措施,确保了核心筒的施工质量和进度。A project consists of basement, commercial podium building, east and west tower buildings, covering a gross building area of 395000m2. Low-altitude jacking formwork system was used in longitudinal shear wall structure of tower building core tube. A series of construction management measures were adopted to guarantee safe operation of the formwork system and prevention of accident, such as establishment of jacking formwork management system, emphasis on application and maintenance of jacking formwork system and strengthening of jacking formwork travel course control. These measures successfully ensured the construction quality and schedule of the core tube.

关 键 词：超高层建筑 核心筒 低位顶升模架 

分 类 号：TU755.2[建筑科学—建筑技术科学]