基于Moldflow和Taguchi正交试验的汽车空调外壳安装板注射成形工艺参数优化  

Optimization of Process Parameters in Injection Moulding of Mounting Panel of Automobile Air Conditioner Housing Based on Moldflow and Taguchi Orthogonal Experiment

作　　者：李晶[1] 郭小汝 徐阳[1] 胡春霞[1] 韩翠红[2] 

机构地区：[1]兰州工业学院材料工程学院,甘肃兰州730050 [2]天津职业技术师范大学机械工程学院,天津300222

出　　处：《兰州工业学院学报》2016年第3期76-78,共3页Journal of Lanzhou Institute of Technology

基　　金：兰州工业学院青年科技创新项目(16K-005)

摘　　要：应用Moldflow软件对汽车空调外壳安装板进行注射成形仿真.针对成形过程中出现的翘曲和缩痕,采用Taguchi方法设计正交试验,分析主要成形工艺参数对翘曲变形和缩痕深度的影响,并获得最优注射成形工艺参数组合.Injection moulding simulation of mounting panel of automobile air conditioner housing was carried out with Moldflow software. Aiming at the warpage and sink mark existing in forming process,orthogonal experiment was designed by using Taguchi method to analyze the influence of main technological parameters on warping deformation and sink mark depth,and the optimal combination of technological parameters in injection moulding was obtained.

关 键 词：汽车空调外壳安装板 注射成形 翘曲和缩痕 工艺参数 MOLDFLOW Taguchi正交试验 

分 类 号：TQ320.5[化学工程—合成树脂塑料工业]