多层金属粘接壳体设计与加工研究  

Research on design and machining of multi- layer metal adhesive shell

作　　者：江晖[1] 徐东鸣[2] 宋志坤[2] 

机构地区：[1]中国工程物理研究院总体工程研究所,四川绵阳621999 [2]中国工程物理研究院机械制造工艺研究所,四川绵阳621999

出　　处：《制造技术与机床》2016年第6期127-129,134,共4页Manufacturing Technology & Machine Tool

摘　　要：以一种多层金属粘接壳体结构,通过有限元分析软件Ansys Workbench进行胶层应力分析,并与相应的胶种强度测定数据进行对比,确定了该胶种的可行性。最后通过制定合理可行的工艺措施及粘接方案,完成该复杂多层金属粘接壳体加工。Aimed at a research model of the multi - layer metal adhesive shell, the stress of the adhesive layer was analyzed by the finite element analysis software Ansys Workbench. By comparing with the measurement data of epoxy resin＇s strength, we confirmed that the reliability of this adhesive structure was good. In the end, the complex multi - layer metal adhesive shell machining is completed by setting up the reason- able and feasible processing technology and adhesive solution.

关 键 词：多层金属 粘接壳体 ANSYS WORKBENCH 

分 类 号：TH16[机械工程—机械制造及自动化]