检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
机构地区:[1]浦林成山(山东)轮胎有限公司,山东荣成264300
出 处:《轮胎工业》2016年第5期277-279,共3页Tire Industry
摘 要:介绍11R22.5-C900全钢城市公交专用轮胎的设计。结构设计:外直径1 059 mm,断面宽274 mm,行驶面宽度216 mm,行驶面弧度高6 mm,胎圈着合直径570 mm,胎圈着合宽度223 mm,断面水平轴位置(H_1/H_2)1.3,胎面采用纵向花纹沟设计,花纹深度21 mm,花纹饱和度75.2%,花纹周节数54。施工设计:胎面采用双复合挤出机挤出,带束层采用4层带束层结构,1~#带束层使用3×0.20+6×0.35HT钢丝帘线,2~#和3~#带束层采用3+8×0.33HT钢丝帘线,4~#带束层使用5×0.35HI钢丝帘线,胎体采用3×0.24/9×0.225+1HT钢丝帘线,采用一次法成型机成型、双模定型硫化机硫化。成品性能试验结果表明,成品轮胎充气外缘尺寸和强度性能符合设计和国家标准要求,耐久性能和高速性能符合企业标准要求。The design on 11R22.5-C900 city bus radial tire was described. In structure design,the following parameters were taken:overall diameter 1 059 mm,cross-sectional width 274 mm,width of running surface 216 mm,arc height of running surface 6 mm,bead diameter at rim seat 570 mm,bead width at rim seat 223 mm,maximum width position of cross-section(H_1/H_2) 1. 3,longitudinal pattern grooves with pattern depth 21 mm and block/total ratio 75. 2%,total number of pitches 54. In construction design,the following processes were taken:co-extruded tread,3×0.20+6×0.35 HT steel cord for 1~# belt,3 + 8×0. 33 HT steel cord for 2~# and 3~# belt,5×0.35 HI steel cord for 4~# belt,3 + 9×0. 22 + 0. 15 HT steel cord for carcass ply;using single stage building machine to build tire,and twin mold shaping and curing press to cure tire. The finished tire test results showed that,the inflated peripheral dimension and strength performance met the requirements of corresponding design and national standard,and the endurance and high speed performance met the requirements of enterprise standard.
关 键 词:全钢城市公交专用轮胎 结构设计 施工设计
分 类 号:U463.341[机械工程—车辆工程] U469.13[交通运输工程—载运工具运用工程]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.15