热固性塑料基座注塑数值模拟与工艺参数优化  

Numerical Simulation and Process Parameters Optimization of Injection Molding of Thermosetting Plastic Pedestal

作　　者：肖世龙[1] 黄勇[1] 陈振[1] 张景[1] 韩莹[1] 王义[2] 

机构地区：[1]沈阳理工大学艺术设计学院,辽宁沈阳110159 [2]沈阳二一三电器有限公司,辽宁沈阳110159

出　　处：《塑料工业》2016年第6期57-60,68,共5页China Plastics Industry

摘　　要：以Moldflow模拟软件为分析平台,研究了基座注塑模具及工艺参数的优化。通过数值模拟分析了填充、保压、翘曲等过程,优化了基座浇注系统设计,得到了合理的注塑工艺参数。根据模拟结果设计并制造出了基座注塑模具,生产出了合格的基座产品,验证了模拟结果的正确性并可用于生产实际中。Based on the Moldflow simulation software, the optimization of the injection mold and theprocess parameters for the thermosetting plastic pedestal were studied. Through numerical simulation, theprocess of filling, holding pressure and warping were analyzed, and the design of the gating system wasoptimized. So the reasonable injection parameters were obtained. According to the simulation results, thebase injection mould was designed and manufactured, and the qualified base product was produced, whichverified the correctness of the simulation results and could be used in the production practice.

关 键 词：基座 注塑成型 数值模拟 热固性塑料 

分 类 号：TQ320.662[化学工程—合成树脂塑料工业]