自动研磨对精冲模零件表面影响的研究与参数优化  

Influence on fine blanking die parts surface integrity of automatic grinding and the parameter optimization

作　　者：易静文[1] 张祥林[1] 屈亚奇 曹洪志[1] 孙楠 

机构地区：[1]华中科技大学材料成形与模具技术国家重点实验室,湖北武汉430074 [2]湖北中航精机科技有限公司,湖北襄阳441003

出　　处：《模具工业》2016年第6期11-15,共5页Die & Mould Industry

摘　　要：为了研究自动研磨对模具零件表面的影响,以线切割后的S390粉末冶金钢为研究对象,以研磨时间、装夹角度、缸体转速、自转速度等4个因素进行正交试验,通过分析表面材料去除量、表面粗糙度、残留应力等指标,得出研磨工艺对各参数指标影响的主次关系和最优研磨参数组合。试验结果表明:表面材料去除量随着缸体转速的增加和加工时间的延长而增大,表面粗糙度随着缸体转速的增加而增大,残留应力随着缸体转速的增加而减小。In order to investigate the influence on surface integrity due to automatic grind- ing, taking the grinding process of grade S390 steel that has been electrical discharge ma- chined as a research project. The orthogonal experiment was carried out on the related fac- tors in the grinding process like grinding time, clamping angle, cylinder rotational velocity and clamp rotational velocity. Through the measurement of grinding surface roughness, ma- terial removal amount, residual stress, primary and secondary sequence and an optimal com- bination of parameters suitable for the grinding of die were obtained. The results showed that the surface material removal amount increased with cylinder rotational velocity and grinding time increasing, the surface roughness decreased with cylinder rotational velocity increasing, the residual stress decreased with cylinder rotational velocity increasing.

关 键 词：研磨工艺 表面粗糙度 材料去除量 残留应力 精冲模 

分 类 号：TG386.41[金属学及工艺—金属压力加工] TP391.77[自动化与计算机技术—计算机应用技术]