对氯苄叉二氯相转移催化水解制备对氯苯甲醛工艺研究  

Preparation of p-Chlorobenzaldehyde by Catalytic Hydrolysis of p-Chlorobenzal Chloride with Phase Transfer Agent

作　　者：武文娟[1] 陈东旭[1] 吴卫[1] 

机构地区：[1]湖南化工职业技术学院,湖南株洲412004

出　　处：《化工技术与开发》2016年第6期6-8,共3页Technology & Development of Chemical Industry

基　　金：湖南省教育厅高等学校科研项目(14C0384);湖南省教育厅高等学校科研项目(15C0465)

摘　　要：采用相转移剂催化水解对氯苄叉二氯制备对氯苯甲醛,考察了催化剂种类和用量、水的用量、水解反应温度对水解反应的影响。实验结果表明,以PTC-1相转移剂为对氯苄叉二氯水解制备对氯苯甲醛的催化剂,适宜的水解反应条件为:催化剂用量为对氯苄叉二氯质量的0.15%,水与对氯苄叉二氯的质量比为2.0∶1,反应温度100℃。在此条件下,对氯苄叉二氯水解转化率达99%以上。p-Chlorobenzaldehyde was prepared by the catalytic hydrolysis reaction of p-chlorobenzal chloride with phase transfer agent. The influence of catalyst type and amount, amount of water and temperature on hydrolysis reaction, were investigated. The results showed, in the preparation of p-chlorobenzaldehyde by hydrolysis of p-chlorobenzal chloride, PTC-1 was applied as the phase transfer catalyst agent, and the optimum hydrolysis reaction conditions were: catalyst dosage was 0.15% of p-chlorobenzal chloride, the mass ratio of water to p-chlorobenzal chloride was 20:1, and temperature was 100℃. Under these conditions, the hydrolysis conversion rate of p-chlorobenzal chloride was more than 99%.

关 键 词：相转移剂 合成 对氯苯甲醛 

分 类 号：O643.3[理学—物理化学]