空气击锤装置模拟硬目标侵彻实验方法  

Using Air Hammer Device Simulate Hard Target Penetration Process

作　　者：满晓飞[1] 门士滢 马少杰[1] 张合[1] 

机构地区：[1]南京理工大学智能弹药技术国防重点学科实验室,江苏南京210094

出　　处：《探测与控制学报》2016年第3期90-93,共4页Journal of Detection & Control

基　　金：武器装备"十二五"预先研究项目(51305060203)

摘　　要：针对现有空气击锤实验装置所产生的冲击加速度脉宽过短的问题,提出了利用改进后的立式空气击锤模拟侵彻过程的实验方法。该方法采用了强度更高的材料作为试验弹体,在保证结构安全性的前提下,适当降低了接触硬度,提高了抗冲击综合性能。在不同气压条件下进行了冲击试验,将测得的冲击信号特征与实际侵彻过程的加速度特征进行了对比,结果表明两者具有较高的一致性,改进后的立式空气击锤可作为实验室检测硬目标侵彻引信的测试手段,用于模拟侵彻过程。Aiming at the the short pulse duration problem of the air hammer experimental device,the experimental method to simulate the penetration process with the improved vertical air hammer was put forward.In this method,a material of higher strength was used as the test body.To ensure the structural safety of the premise,the appropriate reduction of contact hardness was made to improve the impact resistance.Under different pressure conditions,the impact signal characteristics and the acceleration characteristics of the actual penetration process were compared.The results showed that the improved vertical air hammer could be used as a test method for the laboratory test of hard target penetration fuze.

关 键 词：立式空气击锤 硬目标侵彻引信＊莫拟测试＊言号特征 

分 类 号：TJ430.3[兵器科学与技术—火炮、自动武器与弹药工程]