多强度点火具的设计及试验研究  

Study on the Design of Multi-Strength Igniter in Warhead and Its Testing

作　　者：陈伟[1] 陈瑶[2] 

机构地区：[1]73853部队 [2]南京军区联勤部信息中心

出　　处：《军械工程学院学报》2016年第3期35-37,共3页Journal of Ordnance Engineering College

基　　金：中国博士后科学基金项目(20100480686)

摘　　要：现代作战方式对弹药低附带损伤和灵活性提出更高的要求,使爆炸当量可调战斗部成为新的研究方向,而点火强度是战斗部输出能量的重要影响因素之一.按照项目要求,在理论分析的基础上,设计一种具有3种不同点火强度的点火具并利用试验检验点火具的点火能力及对应战斗部爆炸能量.试验结果表明,该点火具能够输出3种不同的点火能量,相应的战斗部输出能量差异明显.该设计方案能够达到对战斗部输出威力的控制.Modern mode of operations sets high requirements for ammunition＇s low collateral damage and flexibility,and the development of warheads with adjustable equivalent has become a new research area.Ignition strength is one of important factors affecting the energy output of warhead.In line with the program requirements and on the basis of theoretical analysis,one kind of ignition case with three different ignition strengths was designed,whose ignition ability and influence on energy output of warhead were tested.The results show that the ignition case can produce three different ignition strengths,and the corresponding warheads can produce significantly different energies,and that this design made the warheads＇ output power controllable.

关 键 词：威力可控战斗部 点火具 点火能量 爆炸威力 

分 类 号：TJ413.3[兵器科学与技术—火炮、自动武器与弹药工程]