顺丁橡胶装置丁二烯超标工程治理效果评价  

Butadiene Rubber Device Butadiene Exceeds Governance Effect Evaluation

作　　者：赵盛[1] 高翔[1] 张昌运[1] 李新鸾[1] 

机构地区：[1]中国石化安全工程研究院,山东青岛266071

出　　处：《安全、健康和环境》2016年第6期31-33,共3页Safety Health & Environment

摘　　要：目的:运用卫生工程技术,针对某顺丁橡胶装置巡检岗位丁二烯超标原因提出改造方案,使改造后的岗位接触丁二烯浓度达到国家卫生标准。方法:对某顺丁橡胶装置巡检岗位和作业场所进行监测,结合现场调查,分析丁二烯超标原因,改进密封部件,增加回收系统,改进局部排风系统。结果:由于设备密封老化、无油罐气相回收系统、局部排风量偏低等,导致岗位空气中丁二烯浓度超标5倍。在进行改进密封部件、增加回收系统、改进局部排风系统后,该岗位空气中丁二烯浓度降至标准限值以下。结论:该顺丁橡胶装置巡检岗位采取的卫生工程措施切实可行,达到了预期目标。Objective： To use sanitary engineering technology, against a proposed rehabilitation pro- grams butadiene rubber plant inspection post butadi-ene exceeded reasons, after the transformation of post -butadiene exposure concentration of national health standards. Methods： a butadiene rubber plant in- spection jobs and workplace monitoring, combined with field investigation, analysis butadiene exceeded reason, improved sealing member, increase recycling system, improve local exhaust system. Results： Due to aging equipment sealing, no tank vapor recovery systems, local exhaust volume is low, leading to post - butadiene in air concentrations exceeding 5 times. After being improved seal member, increase recycling system, improve local exhaust system, which posi- tions the air butadiene concentration to the standard limit. Conclusion： The sanitary engineering meas- ures butadiene rubber plant inspection posts take practicable, to achieve the desired objectives.

关 键 词：顺丁橡胶装置 丁二烯 卫生工程治理 

分 类 号：R134[医药卫生—劳动卫生] TQ333.2[医药卫生—公共卫生与预防医学]