检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:魏凯耀 曾竟成[1] 杜刚[1] 杨金水[1] 鞠苏[1]
机构地区:[1]国防科学技术大学航天科学与工程学院,长沙410073
出 处:《复合材料学报》2016年第6期1234-1241,共8页Acta Materiae Compositae Sinica
基 金:国家自然科学基金(11202231;51303208;51403235);国防科技大学校研项目(JC12-01-07)
摘 要:设计了一种新型整体缝合夹芯结构。采用真空导入模塑工艺(VIMP)制备整体缝合夹芯结构复合材料,研究其在平压载荷作用下的力学性能和破坏模式,建立其有限元模型,研究缝合纱线用量对整体缝合夹芯结构复合材料平压力学性能的影响。结果表明:该新型整体缝合夹芯结构复合材料能够在提高缝合纱线数量的同时避免一般斜缝方式引起纤维交叉损坏的弊端。整体缝合夹芯结构复合材料的压缩强度和压缩模量随着缝合纱线数量的增加而增大,但缝合纱线含量较高时,比压缩强度有所下降。数值计算结果与试验结果对比分析,验证了所建立有限元模型的合理性,说明该模型可用于预测其压缩模量。New type of integrated stitch sandwich structure was designed.The integrated stitched sandwich struc-ture composites were prepared by vacuum infusion molding process (VIMP)to investigate the mechanical perform-ance and failure mode under the flatwise compression load.Finite element model was established to study the effects of the stitching yarn consumption on flatwise compression mechanical properties of integrated stitched sandwich structure composites.The results indicate that the new type of integrated stitch sandwich structure composites can improve the number of yarns and avoid the disadvantages of fiber cross damage caused by the traditional angled stitched.The compression strength and compression modulus of integrated stitched sandwich structure composites increase with the increase of the number of stitching yarn.However the specific compression strength will decrease when the number of stitching yarn is high.The rationality of the established finite element model is validated by comparing with numerical calculation results and test results.It indicates that the model could be used to predict the compression modulus.
分 类 号:TB332[一般工业技术—材料科学与工程]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.117