高压辊终粉磨后含铜银多金属矿的浮选工艺研究  

INVESTIGATION ON FLOTATION PROCESS OF COPPER-SILVER POLYMETALLIC ORE AFTER FINAL GRINDING WITH HIGH PRESSURE GRINDING ROLLS

作　　者：王东辉[1] 印万忠[1] 孙大勇[2] 马英强[1] 

机构地区：[1]福州大学紫金矿业学院,福州350108 [2]北京华夏建龙矿业科技有限公司,北京100070

出　　处：《矿冶》2016年第3期1-5,共5页Mining And Metallurgy

基　　金：龙岩市科技计划项目(2013LY27)

摘　　要：福建某铜银多金属矿为铜、银、铅、锌复杂共生的难选多金属矿。利用高压辊磨终粉磨系统制备高压辊终粉磨矿样,采用一次粗选、一次精选、一次扫选进行铜银混合浮选,混合粗精矿再磨后采用一次粗选、五次精选、一次扫选,进行铜银分离。通过对工艺流程及药剂制度的优化,最终获得的铜精矿中含铜19.42%、含银4456.00 g/t、铜回收率为53.91%、银回收率为32.99%,银精矿中含铜1.76%、含银992.85 g/t、铜回收率为40.74%、银回收率为61.30%,实现了铜银的有效分离。The copper-silver polymetallic ore in Fujian was a kind of refractory inter-grown cooper-silver-leadzinc complex ore. The ore samples were prepared by HPGR final grinding system. The process flowsheet was bulk flotation of copper and silver by one roughing, one cleaning and one scavenging, and the bulk concentrate obtained was processed further with copper-silver separation by one roughing, five eleanings and one scavenging with regrinding of rough concentrate. Through the optimization of process flowsheet and reagent regime, the copper concentrate containing 19.42% Cu and 4456.00 g/t Ag with copper recovery of 53.91% and silver recovery of 32.99% was obtained, while the silver concentrate contained 1.76% Cu and 992.85 g/t Ag with copper recovery of 40.74% and silver recovery of 61.30%. Effective separation of copper and silver was thus achieved.

关 键 词：铜银矿 高压辊磨机 终粉磨 浮选 

分 类 号：TD95[矿业工程—选矿]