粳稻定向播种装置供种机构性能数值模拟与试验  

Numerical simulation and experiment on performance of supplying seeds mechanism of directional precision seeding device for japonica rice

作　　者：韩豹[1] 孟繁超[1] 梁丽娜[1] 杨亚楠[1] 王彬[1] 

机构地区：[1]东北农业大学工程学院,哈尔滨150030

出　　处：《农业工程学报》2016年第14期22-29,共8页Transactions of the Chinese Society of Agricultural Engineering

基　　金：国家自然科学基金资助项目(51175074)

摘　　要：为稳定粳稻定向精量播种装置在低播量时的播种性能、提高作业效率,设计了一种离心式供种机构。建立了粳稻籽粒和供种机构的三维仿真模型,采用EDEM软件对该机构供种性能进行单因素数值模拟,分析了进种口开度、转盘直径和转速3个主要工作参数对供种性能的影响,并在粳稻定向精量播种装置上进行了供种性能验证试验与播种性能对比试验。仿真结果表明:进种口开度和转盘转速对粳稻籽粒离散程度和供种性能影响显著,转盘直径对总排量有一定影响但不明显,各供种口排量标准差变异系数先减后增;在转盘直径为220 mm、转盘转速为80 r/min和进种口开度为10 mm时,模拟总排量为263粒/s,各供种口排量标准差变异系数为14.37%;供种性能验证试验表明:在相同条件下,供种性能与进种口开度仿真与试验变化趋势一致,试验结果比仿真结果分别高13粒/s和1.19%。播种性能对比试验表明:增设供种机构后,粳稻定向精量播种装置在低播量时播种性能稳定,作业效率提高25%。该研究为粳稻定向精量播种装置性能的提升提供参考。The planting area of rice is about 30 million hectares each year, of which japonica rice is close to 9 million hectares mainly planted in Heilongjiang, Jilin, Liaoning and Jiangsu provinces. With the increasing demand for high-quality milled rice, japonica rice planting areas and total yields increased rapidly in recent years. Nursery transplanting is the mainly used planting pattern for japonica rice, and it has been proved that cultivating more tillers and strong seedlings is one of the key measures for improving good quality and high yield for japonica rice. In order to cultivate strong seedlings suitable for mechanical-planting, a large number of precision seeding machines, which have more uniform seeds distribution and better growing area for per seed, had been developed by researchers all over the world. Among various precision seeders, those utilizing air-suction metering devices were researched and used most widely, but problems occurred with the suction holes easily to be blocked and hardly to be cleaned. Based on the directional precision seeding device for japonica rice, in order to further stabilize the seeding performance and enhance working efficiency of the device in low seeding rate, a centrifugal supplying seeds mechanism was designed which was primary composed of seeds box, a horizontal turnplate with guide cone and a conical flow divider with V-shape grooves, etc. The simulation model of japonica rice particle and the mechanism were established using Solidworks software in order to determine performance parameters of the supplying seeds mechanism, and supplying seeds performance simulation of the mechanism was carried out by EDEM software. The relationships between supplying seeds performance and turnplate diameter, rotation speed and inlet opening were studied and analyzed, respectively. The simulation results indicated that the inlet opening and turnplate rotation speed had significant effect on seeds dispersion degree and supplying seeds performance, which the total flow rate increased in li

关 键 词：农业机械 作物 试验 粳稻 定向精量播种 供种机构 供种 离散元法 

分 类 号：S223.25[农业科学—农业机械化工程]