灰铁铸件表面珠光体含量低的原因分析与工艺改进  

Cause Analysis of Low Pearlite Content in Gray Iron Surface and Improvement

作　　者：李金武[1,2] 樊湘芳[1] 聂建隆 文银香 

机构地区：[1]南华大学机械工程学院,湖南衡阳421000 [2]湖南机油泵股份有限公司铸造事业部,湖南衡阳421000

出　　处：《铸造技术》2016年第6期1283-1284,1289,共3页Foundry Technology

基　　金：湖南省高校科技创新团队支持计划资助(湘教通[2012]318号);湖南省重点学科建设项目资助(湘教发[2011]76号)

摘　　要：灰铁铸件的表面珠光体含量少会影响铸件的可靠性和使用寿命。针对铸件表面珠光体含量偏低的情况,从改善石墨形态、稳定珠光体两方面考虑进行工艺改进。试验结果表明:通过降低Si/C、加入Sn元素合金化、增强孕育处理可提高铸件表面珠光体含量。The low pearlite content in the surface of gray iron castings will affect the reliability of the castings and service life. Aimed at the low pearlite content in casting surface, the process was improved from two aspects of graphite morphology and stable pearlite. The experimental results show that the pearlite content in gray iron casting surface can be improved by reducing the Si/C ratio, joining alloying element of Sn and enhancing inoculation treatment.

关 键 词：Si/C SN 灰铸铁 珠光体 

分 类 号：TG251[金属学及工艺—铸造]