检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
机构地区:[1]广州大学土木工程学院,广州510006 [2]广州运鸿能源科技有限公司,广州510000
出 处:《建筑节能》2016年第7期46-50,共5页BUILDING ENERGY EFFICIENCY
基 金:国家自然科学基金资助项目(51078092)
摘 要:干燥物料需要消耗大量的能量。我国的干燥能耗占工业总能耗比例达到了12%。机械化程度低是我国干燥能耗大于发达国家的主要原因。将热泵技术应用于物料干燥节能效果明显,并且热泵干燥是一种温和的干燥方式,干燥产品品质好,干燥温度调节范围宽,干燥参数易于控制。相比于热泵干燥,太阳能干燥运行费用低,环境污染少,也得到了广泛的关注。把太阳能与热泵结合起来进行物料干燥相比原有单一热泵系统有较大改进和提高。论述了国内外太阳能辅助热泵干燥技术。Drying material ivill use a lot of energy. The energy consumption of drying takes up 12%of the total energy consumption of industpy in China. Tlve greater drying consumption in our country thanthat in the developed countries h caused by the loiv degree of mechanization. The heat pump technologyapplied, to the material drying can get an obvious energy saving effect, meanwhile^ the heat pump drying isa moderate drying method, ivith better drying product qualUy, wide adjusting range of drying temperature,and easier parameters control. Compared with, the heat pump drying, the solar drying operation cost is loiverivith less environmental pollution tvhich also received wide attention. Solar-assisted heat pump dryingtechnology has greater improvement compared to the original single heat pump system. The solar-assistedheat pump drying both at home and abroad is expounded.
关 键 词:物料干燥 热泵 太阳能 节能 品质好 太阳能辅助热泵干燥
分 类 号:TU83[建筑科学—供热、供燃气、通风及空调工程]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.106