检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:苏翔[1]
出 处:《电源技术》2016年第6期1196-1198,共3页Chinese Journal of Power Sources
摘 要:考察了Li I、Li PF6、Li Cl O4、Li TFSI不同锂盐对锂/二硫化亚铁(Li/Fe S2)一次电池内阻、开路电压及放电性能的影响。按Li I、Li PF6、Li Cl O4、Li TFSI的顺序,Li/Fe S2电池平均内阻分别为122、108、152、136 mΩ,平均开路电压为1.91、1.92、1.87、1.93 V。在-30℃下锂盐采用Li TFSI的Li/Fe S2电池性能最好,1 000 m A恒流放电Li TFSI电池放电中值电压比最低的Li Cl O4约高0.09 V,1 000 m A放电容量比Li Cl O4约高243 m Ah。随着温度的升高,不同锂盐电池的放电性能均明显提升,Li I、Li PF6性能提升幅度最大。当低于50℃时Li PF6放电性能优于Li I,Li PF6可作为Li/Fe S2电池用锂盐Li I的替代品。The effects of Li I,Li PF6,Li Cl O4 and lithium bis(trifluoromethylsulfonyl)imide(Li TFSI) on internal resistance,open circuit voltage and discharge performance of Li/Fe S2 primary batteries were investigated.In accordance with the sequence of Li I,Li PF6,Li Cl O4 and Li TFSI,the average internal resistances of the battery are 122,108,152 and 136mΩ; open circuit voltages are 1.91,1.92,1.87 and 1.93 V.Under-30 ℃,the batteries prepared by Li TFSI possess the best performance.At 1 000 m A,the mean discharge voltage of Li/Fe S2 battery used Li TFSI is more than 0.09 V higher than which one used Li Cl O4; capacity is more than 243 m Ah than which one used Li Cl O4.The discharge performances of different batteries improve as the temperature is improved,and the batteries prepared by Li I and Li PF6 have the biggest hoist scope.Below 50 ℃,the discharge property of Li PF6 is superior to Li I.Li PF6 can be used as a substitute for Li I in Li/Fe S2 battery..
分 类 号:TM912[电气工程—电力电子与电力传动]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.28