电活性聚合物能量转换机理及实验研究  

Generation Mechanism and Experiment on Energy Conversion of Dielectric Electro Active Polymer

作　　者：林桂娟[1] 张欣波[1] 王克胜 

机构地区：[1]厦门理工学院机械与汽车工程学院,福建厦门361024 [2]挪威科学技术大学生产和质量工程系

出　　处：《上海交通大学学报》2016年第6期831-836,共6页Journal of Shanghai Jiaotong University

基　　金：国家自然科学基金青年基金项目(51207133);福建省自然科学基金面上项目(2016J01268)资助

摘　　要：基于介电高弹聚合物理论构建电活性聚合物发电过程的数学模型,以揭示硅树脂电活性聚合物在电致大变形过程中的机电耦合规律及能量转换机理;根据能量收集的循环过程建立了恒电压、恒电荷、恒电场和恒电流条件下的能量收集模型及混合能量收集模型;针对机电能量的转换效率对比分析各种模型的性能;同时,搭建风能发电机实验装置并进行恒电荷条件下发电过程的能量收集实验.结果表明,恒电荷条件下的能量收集模型的能量转换效率最高.A mathematical model was developed on dielectric electro active polymer（DEAP）generator based on the theory of dielectric elastomers.The electromechanical coupling law and the energy conversion mechanism were revealed during the giant voltage-induced deformation.The energy harvesting cycle was studied at a constant voltage,charge,electric field,current,and mixture respectively.These different models for energy harvesting were analyzed comparatively for electromechanical energy conversion.Finally,the prototype was established with silicone DEAP from Danfoss for the wind generator,through which harvesting energy was studied under the constant charge model.The experimental results and analysis show that the efficiency of the electromechanical energy conversion is the highest with a constant charge,of all these harvesting energy cycle models.

关 键 词：电活性聚合物 压电性能 能量收集模型 恒电荷 

分 类 号：TM61[电气工程—电力系统及自动化]