UOP再生器新型裙座设计研究  

Design and Research for the New Typical Skirt of UOP Regeneration Tower

作　　者：吕春磊 赵骞 潘晓栋 

机构地区：[1]兰州兰石重型装备股份有限公司青岛设计部,山东青岛266520

出　　处：《压力容器》2016年第6期33-37,共5页Pressure Vessel Technology

摘　　要：裙座是立式设备的重要部件,根据目前国内的标准及规范无法确定新型裙座的温度场及裙座材料的选择是否满足再生器操作温度的要求。针对此问题,提出了选材及温度场的估算方法,运用ANSYS软件对再生器裙座进行温度场估算和分析,验证在设计温度下裙座的选材是否合理,最终保证裙座设计满足设备运行要求。The skirt is one of the most important part of the vertical vessel, there is no way to confirm if the temperature field and material of the new typical skirt could satisify the operating temperature requirements for regeneration tower according to the domestic standards and specification. To solve this problem, one estimate method for material selection and temperature field was put forward. ANSYS was run to estimate and analyse the regeneration tower skirt to verify if the material selection is reasonable under the design temperature, to ensure that the skirt design would satisify the requirements for equipment operation.

关 键 词：再生器 裙座 温度场 材料选择 有限元分析 

分 类 号：TH122[机械工程—机械设计及理论] TE966[石油与天然气工程—石油机械设备]