微小弧度壁板零件喷丸工艺研究  

Shot peening for the panel with small curvature

作　　者：门向南[1] 陈雪梅[1] 

机构地区：[1]中航工业成都飞机工业(集团)有限公司,成都610073

出　　处：《塑性工程学报》2016年第3期88-91,共4页Journal of Plasticity Engineering

摘　　要：以微小弧度壁板零件为研究对象,提出喷丸强化和喷丸成形同时进行的方法,解决了先喷丸成形后喷丸强化导致零件产生变形、先喷丸强化后喷丸成形导致成形困难的问题。所采用的喷丸工艺方法,适用于有喷丸强化要求并需要成形出微小弧度的壁板零件。In this paper, a method of shot peening simultaneously with shot peening forming is proposed to solve the problem, viz. , the process of first shot peening forming then shot peening results in excessive deformation, and that of first shot peening then shot peening forming causes forming to be difficult. The proposed process is suitable for the panel parts with a small curvature.

关 键 词：喷丸成形 喷丸强化 微小弧度壁板 喷丸强度 

分 类 号：V261.94[航空宇航科学与技术—航空宇航制造工程]