基于CPCI总线的雷达导引头测试系统设计与实现  

Realization and Research ofTest System for Radar Seeker Based on CPCI Bus

作　　者：王子龙[1] 路景泽 

机构地区：[1]中国空空导弹研究院,河南洛阳471000 [2]北京航空航天大学,北京100191

出　　处：《计算机测量与控制》2016年第7期141-143,共3页Computer Measurement &Control

摘　　要：雷达导引头是空空导弹的核心部件,实现导弹探测、制导和控制等功能,其性能的优劣直接影响着导弹跟踪和截获目标的准确率;为了全面测试空空导弹雷达导引头,设计开发了一种基于CPCI总线的雷达导引头测试系统,并完成了软硬件设计:硬件部分完成了调理电路的设计、外设的搭建以及硬件电路方面的可靠性设计;软件部分协调控制雷达导引头、角位置模拟器、回波模拟器和转台,通过部件之间数据流的传输,完成了各个模块的测试功能;该系统能够真实模拟雷达导引头的工作环境,设置导引头参数,接收处理导引头发回的信息,进而测试雷达导引头的精度、灵敏度、可靠性等指标;实际应用表明,该系统工作性能良好,可靠性高,能够长期稳定运行,达到了设计要求。Seeker is the core component of the airborne missile.It achieves detection,guidance and control functions.Its performance will directly affect the missile tracking and intercept accuracy.In order to test the Radar Seeker completely,the Radar Seeker test system based on CPCIbus is designed in this paper.The subjectintroduces the design ofthe IPC,hardware board,conditioning circuit and peripheral,especially the reliability of the circuit.The software system coordinated control products,angular position simulator,echo simulator and rotary table.Then the system finished the test function of each module and product testing through the flow of data transmission.The system can simulate the workplace of radar seeker,set the parameters of the seeker and receive information transmitted by the seeker.And then the precision,sensitivity,reliability of seeker can be tested by the system.The experiment and application show that this test system has good performance,high reliability,and achieve the design requirement.

关 键 词：空空导弹 雷达导引头 CPCI 信号调理 

分 类 号：TN06[电子电信—物理电子学]