检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:焦阳[1]
机构地区:[1]山西晋城无烟煤矿业集团有限责任公司技术研究院,山西晋城048006
出 处:《煤矿安全》2016年第7期41-43,共3页Safety in Coal Mines
基 金:国家自然科学基金资助项目(50974115);国家重大基础研究发展计划(973计划)资助项目(2013CB227900);高等学校学科创新引智计划资助项目(B07028)
摘 要:为了探索采动对构造内岩体的影响,以晋煤集团成庄煤矿为试验现场,通过对比正常煤层与含非导水陷落柱煤层的底板采动破坏情况,综合研究构造的采动裂隙发育规律。结果表明:正常煤层与含构造煤层底板采动破坏深度的理论、模拟与工程探测结果均在19 m和31 m附近,结果吻合且可靠,即非导水陷落柱的采动裂隙发育深度约为正常煤层的1.7倍。In order to explore the influence of coal mining on rock mass within the structure,taking Chengzhuang Coal Mine of Jincheng Anthracite Mining Group as testing site,through the contrast analysis of floor destruction in normal coal seam and non-flowing water collapse column,we comprehensively research the laws of mining fractures within structure. The results show that the results of floor mining-induced damage depth for normal coal seam and tectonic coal seam from numerical simulation,theoretical calculation and engineering tests are 19 m and 31 m; the data matched each other very well. In other word,the mining-induced fracture depth of non-flowing water collapse column is 1. 7 times of the normal coal seam.
关 键 词:煤层底板 非导水陷落柱 裂隙发育深度 应力-应变试验 突水
分 类 号:TD722[矿业工程—矿井通风与安全]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:13.58.215.45