密炼法制备再生橡胶及二次硫化胶的研究  

Preparation of reclaimed rubber by mixing method and secondary vulcanized rubber

作　　者：高若峰 章登科[1] 彭少贤[1] 赵西坡[1] 

机构地区：[1]湖北工业大学材料科学与工程学院绿色轻工材料湖北省重点实验室,湖北武汉430068

出　　处：《弹性体》2016年第3期12-17,共6页China Elastomerics

基　　金：国家自然科学基金资助项目(51273060)

摘　　要：采用密炼法利用转矩流变仪再生废旧轮胎橡胶,考察了再生温度、再生时间、转子转速等对溶胶含量以及最低扭矩的影响,并通过傅里叶红外光谱仪、无转子硫化仪、扫描电子显微镜以及溶胶含量测定、力学性能测试,对再生胶的结构和性能进行了表征,获得了最佳的再生方案,确定了再生胶二次硫化的适宜硫化剂用量。Use of mixing method to reclaim wasted tire rubber powder by torque rheometer,investigated the effect on Sol content and the minimum torque by examining the regeneration temperature,regeneration time and rotor speed to determine the best regeneration programs,and using Fourier transform infrared spectroscopy,no rotor rheometer,scanning electron microscope,the sol content,mechanical properties testing,tested and characterized the structure and properties of reclaimed rubber.The results showed that common characterized by sol content and minimum torque to make sure optimal regeneration conditions,temperature 180℃,holding time 25 min,rotor speed 80rpm;the secondary vulcanized rubber added 1.5phr curatives has the best physical and mechanical properties;with the rise of the regeneration temperature and time MH-ML was first increased and then decreased,tc90increased;with the rise of regeneration temperature,tensile strength and elongation at break was first increased and then decreased.

关 键 词：再生橡胶 密炼法 再生程度 物理机械性能 

分 类 号：TQ330.56[化学工程—橡胶工业]