镀锌钢板激光焊焊接接头组织与性能  

Microstructure and Properties of Laser Welded Joints of Galvanized Steel Sheet

作　　者：陈立伟[1] 姜秋月[1] 于燕[1] 刘泽阳[1] 李跃坤[1] 曲正[1] 刘凯[1] 鲁书含 

机构地区：[1]长春工业大学先进结构材料省部共建教育部重点实验室,吉林长春130012

出　　处：《热加工工艺》2016年第15期222-224,共3页Hot Working Technology

基　　金：长春市科技局重大科技攻关项目(14KG039)

摘　　要：采用合理的激光焊接工艺参数对镀锌钢板进行焊接,研究了激光参数对焊接接头组织和性能的影响。结果表明:焊接接头的抗拉强度随着激光功率和焊接速度的增加均呈先增大后减小趋势;焊缝区铁素体组织随着焊接功率的增加长大现象明显,而焊缝区铁素体组织却随着焊接速度的增加而变得细密;焊接接头的焊缝区的硬度均匀,且高出母材很多;焊接接头断口表现出明显的延性断裂特征。The galvanized steel sheet was welded by using the reasonable laser welding parameters, and the influence of laser parameters on microstructure and properties of the welded joints was studied. The results show that the tensile strength of the welded joints increases firstly and then decreases with the laser power and welding speed increasing, and ferrite microstructure of the welded zone grows obviously with the welding power increasing, but ferrite microstructure of the welded zone becomes fine and dense with the increase of welding speed. The hardness of the welded zone is more uniform and higher than that of the parent material; the fracture of the welded joints shows obvious ductile fracture characteristic.

关 键 词：镀锌钢板 激光焊 工艺参数 硬度 

分 类 号：TG456.7[金属学及工艺—焊接]