检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:汪文祥[1] 胡琼[1] 梅德圣[1] 李云昌[1] 周日金 王会[1] 成洪涛 付丽[1] 刘佳[1]
机构地区:[1]中国农业科学院油料作物研究所/农业部油料作物生物学与遗传育种重点实验室,湖北武汉430062
出 处:《作物学报》2016年第8期1103-1111,共9页Acta Agronomica Sinica
基 金:中国农业科学院科技创新工程项目(Group No.118);国家农业现代产业技术体系建设专项(CARS-13);国家自然科学基金项目(31471535);湖北省自然科学基金项目(2014CFB156);湖北省科技创新工程项目资助~~
摘 要:分枝角度是油菜株型重要性状,是油菜品种高产及适合机械化收获理想株型的基本组成之一。为明确油菜分枝角度的遗传,本研究选用油菜分枝角度大的松散型材料6098B和分枝角度小的紧凑型材料Purler配制杂交组合,采用主基因+多基因混合遗传模型方法对该组合6世代(P1、P2、F1、F2、BCP1和BCP2)的分枝角度进行了遗传分析。结果表明,上部第一分枝(顶枝)和基部第一分枝(基枝)角度的最适合遗传模型均为D-0(1对加性-显性主基因+加性-显性-上位性多基因)。顶枝角的主基因加性效应值为4.939o,显性效应值为–4.156o,主基因遗传率在BCP1、BCP2和F2中分别是34.08%、1.40%和14.99%,多基因遗传率分别为24.43%、61.72%和63.98%;而基枝角的主基因加性效应值为2.217o,显性效应值为–1.941o,主基因遗传率在BCP1、BCP2和F2中分别是7.86%、1.24%和4.84%,多基因遗传率分别为66.46%、58.49%和73.96%。结果发现油菜分枝角度明显存在主效基因,为油菜分枝角度的遗传改良奠定了基础。Branch angle is one of important plant architectural traits in rapeseed(Brassica napus), which is the basic requirement for high-density cultivation and mechanical harvesting. To reveal the genetic mechanism of branch angle in rapeseed, we produced six generations(P1, P2, F1, F2, BCP1, and BCP2) from a cross between loose-type 6098 B and compact-type Purler to analyze genetic effects of branch angle in rapeseed by the mixed major gene plus polygene inheritance model. The branch angle showed a continuous normal distribution, where both the basal branch angle and the top branch angle were dominated by a pair of major gene with additive-dominant effects plus polygenes with additive-dominance-epistasis effects(D-0 model). The additive effect and dominant effect of major gene of the top branch angle were 4.939 and –4.156, the heritability in BCP1, BCP2, and F2 was 34.08%, 1.40%, and 14.99%, respectively for the major gene, and 24.43%, 61.72%, and 63.98%, respectively for the polygenes. The additive effect and dominant effect of major gene of the basal branch angle were 2.217 and –1.941, the heritability in BCP1, BCP2, and F2 was 7.86%, 1.24%, and 4.84%, respectively for the major gene, and 66.46%, 58.49%, and 73.96%, respectively for the polygenes. Results of this study found that the branch angle traits of 6098B×Purler is controlled by polygenes, but there is a major gene among them. The research may be useful for further understanding and genetic improvement of plant architecture in rapeseed.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.15