MEA、DEA浸渍改性SBA-15对CO_2吸附性能的研究  

Investigation of the adsorption performance of CO_2 with MEA and DEA modified SBA-15 by impregnation method

作　　者：陈鸿伟[1] 孙玮[1] 张泽[1] 李凡[1] 李岩[1] 

机构地区：[1]华北电力大学能源动力与机械工程学院,河北保定071003

出　　处：《功能材料》2016年第8期8031-8034,8103,共5页Journal of Functional Materials

基　　金：中央高校基本科研业务费专项资金资助项目(2015MS103)

摘　　要：为实现CO_2的高效捕集,采用浸渍法将MEA、DEA分别负载到介孔材料SBA-15的孔道内,研究改性前后样品对CO_2吸附性能的影响,其中主要分析不同温度下CO_2吸附量的变化情况。通过X射线衍射(XRD)、低温N2吸附-脱附(BET)、热重分析(TGA)等手段对所得样品进行表征。结果表明,MEA、DEA均负载到SBA-15的孔道内部,且没有破坏介孔结构;经MEA、DEA改性后样品的吸附性能显著提高,最大吸附量分别提高了51%和75%。To gathering the CO2 more efficiently, the impregnation method was imported to load the MEA andDEA to the pores of SBA-15. The adsorption performance of CO2 was studied before and after the SBA-15 modification.A detailed analysis of the adsorption capacity under different temperature was made. The samples werecharacterized by powder X-ray diffraction （XRD） , low temperature N2 adsorption-desorption （BET）, thermogravimetricanalysis （TGA）. The results show that the MEA, DEA were loaded into the SBA-15 ＇s channels,and there is no destruction of the mesoporous structure. The adsorption performance has been increased obviouslywhen the SBA-15 is modified by MEA/DEA. And the maximum adsorption capacity has been improved by51% and 75% respectively.

关 键 词：SBA-15 浸渍法 醇胺修饰 吸附 CO2 

分 类 号：TB383[一般工业技术—材料科学与工程]