基于Solidworks的大臂组合体有限元分析  

Finite Element Analysis on the Bearing Assembly Based on Solidworks

作　　者：席汝凯 李东明[1,2] 张永玺 韦权伟 

机构地区：[1]长沙矿山研究院有限责任公司,湖南长沙410012 [2]湖南有色重型机器有限责任公司,湖南长沙410205 [3]中南大学,湖南长沙410083

出　　处：《矿业研究与开发》2016年第8期78-80,共3页Mining Research and Development

基　　金：国家863计划项目(2011AA060401)

摘　　要：建立了基于Solidworks的智能中深孔全液压凿岩台车关键变位机构大臂组合体的三维模型。依托Solidworks simulation平台,进行极限位置状态有限元分析,并根据分析结果指导大臂组合体设计,形成了可靠性高、适用性强、符合设计要求的凿岩台车大臂组合体,并通过试验进行了可靠性测试,达到了设计要求。The bearing assembly was a key modified mecha- nism of intelligent full-hydraulic drilling jumbo for medium- deep hole, and its three-dimensional model was established based on Solidworks software. Relying on the Solidworks simulation, the finite element analysis of limiting position was conducted. And the analysis results gave a guidance to design the bearing assembly. Finally, the bearing assembly of drilling jumbo, with high reliability and strong applicabili- ty, was developed, which passed through the reliability tes- ting and met the design requirements.

关 键 词：SOLIDWORKS SIMULATION 大臂组合体 有限元分析 

分 类 号：TD403[矿业工程—矿山机电]