基于引信天线波束控制的引战配合模型  

Fuze Warhead Coordination Model Based on Antenna Beam Control

作　　者：冯清娟[1] 

机构地区：[1]北京信息科技大学,北京100101

出　　处：《探测与控制学报》2016年第4期38-41,共4页Journal of Detection & Control

基　　金：总装预先研究项目资助(51306040402)

摘　　要：针对高速弹目交会条件下,传统引战配合模型引战配合效率低的问题,提出了基于引信天线波束控制的引战配合模型。该模型能根据不同目标类型、不同弹目交会条件调整引信天线波束倾角,控制引信的启动区,使引信的启动角和最佳起爆角重合,实现引信的最佳起爆控制。计算机仿真结果表明,这种引战配合模型可以根据不同弹目交会条件改变引信天线波束倾角,从而实现基于引信天线波束控制的最佳引战配合。由于该模型是基于"触发即启动"原则,无需进行延时控制,这也避免了计算延迟时间带来的误差。In order to improve the efficiency of fuze warhead coordination, especially the fuze warhead coordina-tion efficiency under the condition of high speed missile target intersection, a fuze warhead coordination model based on fuze antenna beam control was presented. This model could realize the fuze optimal initiation control through adjusting the fuze antenna beam angle and the fuze starting area, make the fuze starting angle and the fuze optimum ignition angle coincident according to different target types and different missile target intersection conditions. The simulation results showed that the model could change the fuze antenna beam angle according to different missile and target intersection conditions, and achieved the optimal fuze warhead coordination Because the model was based on the principle of “trig and start”,no delay control was required, the error caused by the delay time could be avoided. This model provided a new technical method to improve the fuze warhead coordina-tion efficiency under the condition of high speed missile target intersection condition

关 键 词：引信 引战配合 天线波束控制 

分 类 号：TJ430.1[兵器科学与技术—火炮、自动武器与弹药工程]