BC9型钢领纺纱张力特性分析  

Analysis on spinning tension characteristics of BC9 ring

作　　者：温欣婷[1] 徐伯俊[1] 刘新金 

机构地区：[1]江南大学生态纺织教育部重点实验室,江苏无锡214122

出　　处：《上海纺织科技》2016年第6期8-10,共3页Shanghai Textile Science & Technology

基　　金：纺织服装产业河南省协同创新项目(hnfz14002);江苏省产学研项目(BY2014023-13;BY2012051;BY2013015-24);江苏省科技成果转化项目(BA2014080);广东省产学研项目(2013B090600038)

摘　　要：为研究BC9型钢领纺纱张力特性,采用纺纱张力测试仪在不同锭速下分别对BC9型钢领和PG1型钢领纺纱张力进行测试,并对测试结果进行对比分析。结果表明：卷绕小直径时,BC9型钢领纺纱张力随锭速的增加而增加,锭速在8000-10000 r/min时,张力增加缓慢;锭速大于10000 r/min后,张力增幅变大,但始终小于PG1型钢领的纺纱张力;与PG1型钢领相比,一落纱过程中,BC9型钢领纺纱张力波动较小。In order to study spinning tension characteristics of BC9 ring, the spinning tension of BC9 ring and PG1 ring is tested atdifferent spindle speed separately with yarn tension tester, and the results are comparative analyzed. The results indicate that the spinningtension of BC9 ring increases with the increasing of spindle speed when winding with minor diameter. The spinning tension of BC9 ringincreases slowly with spindle speed between 8 000-10 000r/ min and much more rapid with spindle speed more than 10 000r/ min, but it isalways smaller than that of PG1 ring. Compared with the PG1 ring, the tension fluctuation of BC9 ring is relatively small in the doffing cycle.

关 键 词：钢领 钢丝圈 锭速 纺纱张力 卷绕直径 

分 类 号：TS104[轻工技术与工程—纺织工程]