荧光材料对转移涂层荧光防水透湿面料性能的影响  

Effect of fluorescence material on performance of fluorescence waterproof and moisture permeability transfer coatings

作　　者：王可[1] 马倩[1] 王曙东[1] 张永革[1] 陆灯红 

机构地区：[1]盐城工业职业技术学院,江苏盐城224005 [2]江苏南纬悦达纺织研究院有限公司,江苏盐城224005

出　　处：《上海纺织科技》2016年第6期21-23,共3页Shanghai Textile Science & Technology

基　　金：2014年度中国纺织工业联合会科技指导性项目计划(2014056);2014年江苏省高校优秀中青年教师境外研修计划;江苏高校品牌专业建设工程资助项目(PPZY2015C254);2015年度江苏高校优秀科技创新团队项目

摘　　要：以聚氨酯为黏合剂,稀土铝酸锶为荧光材料,对织物进行离型纸转移涂层,讨论了稀土铝酸锶的粒径、含量对织物发光性能和防水透湿性能的影响。结果表明,随着稀土铝酸锶粒径和添加量的增加,面料的初始亮度、一定时间后的残余亮度和透湿性能增大,但防水性能降低。当稀土铝酸锶粒径为200目,面层胶料中稀土铝酸锶含量为30%时,转移涂层面料的余辉初始发光亮度达到158.6 mcd/m^2,静水压达到47.56 kPa,水蒸气通透性达到5 876 g/(m^2·24 h),面料各方面性能比较理想。The paper transfer coating of nylon fabric is carried out with polyurethane as an adhesive and SrAl_2O_4 as a fluorescencematerial. The effect of particle size and dosage of SrAl_2O_4 on fluorescence, waterproof and moisture permeability properties is discussed. Theresults show that with the increasing of particle size and dosage of SrAl2O4, the fluorescence and moisture permeability properties improvewhile the waterproof property decreases. When the particle size SrAl2O4 is 200 mesh and the dosage of SrAl2O4 in surface adhesive is 30%,the transfer coatings feature good properties with the initial brightness of 158. 6mcd/m^2, hydrostatic pressure of 47. 56 kPa and moisturepermeability of 5 876g/ m^2·24h.

关 键 词：荧光 防水性 透湿性 转移涂层 

分 类 号：TS195.597[轻工技术与工程—纺织化学与染整工程]