汽车钢板冷轧生产废水处理工程设计  

Engineering design for treatment of cold rolling wastewater from automobile leaf-spring production

作　　者：杜肖 李晓玲 袁蔚文 黄海耀 周明霞 

机构地区：[1]麦王环境技术股份有限公司,上海200135

出　　处：《工业用水与废水》2016年第4期74-76,共3页Industrial Water & Wastewater

摘　　要：介绍了唐钢汽车板冷轧过程中产生的高浓度含油乳化液废水、平整液废水、含碱废水工艺流程及设计参数。含油乳化液废水与平整液废水采用气浮-厌氧预处理,含碱废水采用序进气浮预处理,然后再合并采用缺氧-好氧MBR生化处理工艺流程。目前工程运行稳定,出水COD_(Cr)的质量浓度不超过30 mg/L,出水SS的质量浓度不超过20 mg/L,满足要求。The process flow and design parameters for the treatment of high concentration oily emulsification wastewater, smooth liquid wastewater and alkaline wastewater from cold rolling unit of automobile leaf-spring production in Tang steel enterprise were introduced. It was pointed out that, oily emulsification wastewater and smooth liquid wastewater could be pretreated by air flotation-anaerobic process; alkaline wastewater could be treated using anoxia-aerobic-MBR biochemical process after the pretreatment by air-floatation. The project operated stably, the mass concentration of CODcr and SS were not above 30 and 20 mg/L respectively, which met the relevant requirement.

关 键 词：含油乳化液废水 平整液废水 含碱废水 气浮 MBR 

分 类 号：X703.1[环境科学与工程—环境工程]