基于RMsimple软件的剩余油分布研究——以秦家屯油田SN142区块为例  

Research on Distribution of Remaining Oil Based on Rmsimple:A Case Study from the Block of SN142 in Qinjiatun Oilfield

作　　者：刘旭征[1] 李朋[1] 

机构地区：[1]中国石油化工股份有限公司东北油气分公司,长春130062

出　　处：《重庆科技学院学报（自然科学版）》2016年第4期42-45,共4页Journal of Chongqing University of Science and Technology：Natural Sciences Edition

基　　金：中国石油化工股份有限公司油气开发重要先导项目"腰英台油田CO2驱油先导试验动态分析及评价"(KF-2010-18)

摘　　要：以秦家屯油田SN142区块为例,应用RMsimple软件,结合地质动态、流体性质、测试资料建立地质模型,进行自适应流动数值模拟及剩余油分析计算。研究认为,SN142区块主力砂体农Ⅴ3层的采出程度较高,但剩余储量富集,需要结合大剂量的深部调驱或三次采油技术实现进一步挖潜。靠近北东向断层的区域,沿断层方向形成面积较大的条带状油区。Taking the block of SN142 in Qinjiatun oilfield as an example, based on Geology, dynamic analysis, fluid properties and test data, the geologic model, adaptive flow simulation and residual oil analysis were built. It shows that the recovery degree of main sand bodies layer V3 is higher, but the remaining oil is the most concentrated. Large doses of deep displacement and other tertiary oil recovery technology are need to tap the potential of residual oil. There are many banded hydrocarbon reservoirs along the fault direction nearby the area of N - E fault.

关 键 词：RMsimple 秦家屯油田 SN142区块 剩余油 

分 类 号：TE155[石油与天然气工程—油气勘探]