含铪废合金处理工艺研究  

Study on Treatment of ScrapHafnium-bearing Alloy

作　　者：郭瑞[1] 王靖坤[1] 王治钧[1] 马光[1] 李进[1] 

机构地区：[1]西北有色金属研究院,西安710016

出　　处：《有色金属（冶炼部分）》2016年第8期39-42,共4页Nonferrous Metals（Extractive Metallurgy)

基　　金：陕西省科技统筹项目(2014KTCQ01-43)

摘　　要：采用“电溶—磷酸沉淀”工艺处理某含铪废合金,在电流密度200～300 A/m2,电解液酸度1 mol/LH2 SO4,终点镍离子浓度80 g/L的条件下,电溶过程电流效率可达90％以上,电溶效果良好;电溶液在80℃加入1 g/L磷酸,铪的回收率可达90％以上;铪的综合回收率达95％以上.Scrap hafnium-bearing alloy was treated by electric melting and precipitation with phosphate.Current efficiency is 90％ above under the conditions including current density of 200～300 A/m2,acidity of electrolyte of 1 mol/L H2SO4,and Ni concentration of 80 g/L.Recovery of hafnium is 90％ above when electric solution is heated to 80 ℃ with addition of 1 g/L phosphate.Comprehensive recovery of hafnium is 95 ％ above.

关 键 词：铪 回收 电溶 

分 类 号：TF841.4[冶金工程—有色金属冶金]