基于压电自供电的无线传感网络网关节点设计  

Design of wireless sensor network gateway node based on piezoelectric self-powered

作　　者：何宏[1] 高艳囡 张志宏[1,2] 

机构地区：[1]天津理工大学自动化学院天津市复杂系统控制理论及应用重点实验室,天津300384 [2]天津广播电视台传输发射部,天津300072

出　　处：《中国测试》2016年第9期67-71,共5页China Measurement & Test

基　　金：天津市科技支撑重大科技工程专项基金(14ZCDGSF00028);天津市高等学校创新团队培养计划(TD12-5015)

摘　　要：针对无线传感网络中网关节点数据传输量大、能耗高,导致其难以长时间工作的问题,基于Zig Bee、GPRS、压电电源设计自供电无线传感网络网关节点。首先,采用Zig Bee最小系统CC2530和GPRS模块搭建网关节点硬件结构,CC2530模块实现处理、存储接收数据,GPRS模块实现远距离传输数据;其次,采用压电陶瓷片和能量转换芯片LTC3588-1设计压电自供电电源,给网关节点供电。实验证明,压电陶瓷片在固定振动频率下,输出电压为70 V、电流为19 m A;当有1,2道墙阻隔时丢包率分别低于5%、10%。基于压电自供电的无线传感网络网关节点具有无源、丢包率低、可靠性强等特点。In allusion to the problem that high data transmission speed and energy consumption of wireless sensor network （WSN） undermine WSN＇ s long -time operation, self-powered network gateway node is designed based on ZigBee, GPRS, and piezoelectric power supply. First, network gateway node hardware structure consists of ZigBee minimum system CC2530 and GPRS module. Functions of receiving, processing and storing data are implemented by CC2530 module, and GPRS module realizes long distance transmission. Second, piezoelectric ceramic chip and energy conversion chip LTC3588-1 are used for designing piezoelectric self power supply for providing power to the gateway node. Experiment results show that under fixed vibration frequency, output voltage of the piezoelectric ceramic chip is 70 V and current is 19mA. In case of blocking with one or two walls, packet loss rate is lower than 5% or 10% respectively. WSN gateway node based on piezoelectric self power supply is featured with passive property, low packet loss rate and high reliability.

关 键 词：无线传感网络 LTC3588-1 压电自供电 CC2530 

分 类 号：TP212[自动化与计算机技术—检测技术与自动化装置]