管状带式输送机可伸缩中间架的模态分析  

Modal Analysis on Scalable Middle Frame of Tubular Belt Conveyor

作　　者：王雅楠[1,2] 傅昌虎 丁冉[1] 

机构地区：[1]安徽理工大学机械工程学院,安徽淮南232001 [2]安徽理工大学煤矿安全高效开采省部共建教育部重点实验室,安徽淮南232001

出　　处：《机械工程师》2016年第10期14-15,共2页Mechanical Engineer

基　　金：中国博士后基金一等资助(2013M540506);安徽省高校优秀亲年基金重点项目(2013SQRL027ZD)

摘　　要：管状带式输送机为煤矿连续运输的新型机械,可伸缩中间架作为其重要的组成部分,利用模态分析可以预估其结构动态特性。文中首先对可伸缩中间架进行结构设计,再用SolidWorks进行三维建模,然后导入ANSYS仿真软件进行模态分析,得出相应的频率和振型曲线。从而可基本判断管状带式输送机可伸缩中间架结构的合理性,为可伸缩管状带式输送机的关键部件的研究奠定基础。Tubular belt conveyor is a new type machine of coal mine continuous transportation, and scalable middle frame is an important part of it. Modal analysis can be used to forecast the structural dynamic characteristics. This paper designs the structure of scalable middle frame, then uses SolidWorks to establish 3D modeling and imported it into ANSYS simulation software for modal analysis. The corresponding frequency and vibration curves are obtained to judge whether the scalable middle frame structure of tubular belt conveyor is reasonable. The results provide reference for studying the scalable tubular belt conveyor.

关 键 词：管状带式输送机 可伸缩中间架 SOLIDWORKS ANSYS 模态分析 

分 类 号：TH222[机械工程—机械制造及自动化]