Fe^(3+)对SBBR工艺处理腈纶废水影响因素研究  

Effect of Fe^(3+) on Acrylic Fiber Wastewater Treatment in SBBR

作　　者：郑莹[1] 李杰[1] 

机构地区：[1]兰州交通大学环境与市政工程学院,甘肃兰州730070

出　　处：《广东化工》2016年第19期132-134,共3页Guangdong Chemical Industry

基　　金：[基金项目]生物海绵铁体系中的类Fenton效应及对难降解有机物的降解研究(51468030)

摘　　要：以腈纶废水为研究对象,探讨了Fe^(3+)投加量、pH、无机碳源投加量对SBBR反应器处理腈纶废水的效果及影响。结果表明,Fe^(3+)对腈纶废水中有机物的去除具有促进作用,对氨氮去除效果不明显。在DO为2~4 mg/L,HRT为48 h,Fe^(3+)投加量为20 mg/L,进水pH为7,无机碳源NaHCO_3补充量为0.25 mg/L的最优工况下,投加Fe^(3+)的SBBR反应器出水COD平均去除率可达65%,氨氮平均去除率可达47%。Taking acrylic fiber wastewater as object, investigated the effect of Fe3＋ concentration, pH and Inorganic carbon concentration on acrylic fiber wastewater treatment in SBBR reactor. The test results showed that： Fe3＋ has promoted the removal of organics but has little effect on ammonia removal. When DO was 2-4 mg/L, HRT was 48 h, The concentration of Fe3＋ was 20 mg/L, pH was 7,Inorganic carbon concentration was 0.25 mg/L, The removal rate of COD was higher than 65 %, and ammonia removal rate was higher than 47 %.

关 键 词：FE3+ 腈纶废水 SBBR 

分 类 号：X5[环境科学与工程—环境工程]