MasterCAM内嵌仿真难以查错的刀路纠错研究  

Research on Troubleshooting for Indiscoverable Tool Path Error in MasterCAM Embedded Simulation

作　　者：刘旭华[1] 詹华西[1] 

机构地区：[1]武汉职业技术学院机电工程学院,湖北武汉430074

出　　处：《机床与液压》2016年第20期53-56,共4页Machine Tool & Hydraulics

摘　　要：从三轴加工到五轴加工,针对MasterCAM刀路设计中内嵌仿真难以检查的错误,通过第三方软件对典型案例进行纠错研究,初步分析了引发错误的原因。基于案例解析,提出为提升CAM刀路设计经验,避免错误重复发生,在加工前借助第三方软件对输出的NC程序实施进一步仿真检查的必要性。From three-axis machining to five-axis machining,aiming at the indiscoverable tool path design error in Master CAM embedded simulation,third-party software was used to inspect the errors in typical cases and a preliminary analysis for the causes of the errors was done. Based on case analysis,to enhance the CAM tool path design experience and to avoid repeating mistakes occurring,it was proposed the output NC program should be checked with third-party simulation software before working.

关 键 词：实体切削仿真 机床模型仿真 刀路设计 第三方仿真软件 

分 类 号：TH162[机械工程—机械制造及自动化]