T形管导流块安装位置的一种近似计算方法  

Calculation Method for Orientation of T Type Tube Flow-guide

作　　者：董锬 

机构地区：[1]空军驻新乡地区军事代表室,河南新乡453000

出　　处：《机床与液压》2016年第20期139-140,共2页Machine Tool & Hydraulics

摘　　要：T形管用于某飞机防冰系统,在T形管(三通)处高温空气分成两路,分别从两出口流出,两路流量比例为4∶1。通过计算分析确定T形管导流块的近似安装位置,并通过试验验证其合理性,对同类形T形管导流块的设计起到一定指导作用。T type tube is used in anti-icing system of a aircraft,dividing the high temperature air into two ways flowing from the two outlets of T type tube,which flow ratio is 4∶ 1. The approximate orientation of T type tube flow-guide was determined by calculation,then its rationality was verified by test. It can direct and instruct the designs for similar T type tube flow-guide.

关 键 词：T形管 导流块 安装位置 

分 类 号：TS106[轻工技术与工程—纺织工程]