718镍合金切削过程微结构变化有限元仿真  

Finite Element Simulations of Microstructure Change in Cutting Process of Inconel 718

作　　者：王保卫[1] 孙军龙[1] 

机构地区：[1]鲁东大学交通学院,山东烟台264025

出　　处：《机械科学与技术》2016年第10期1597-1602,共6页Mechanical Science and Technology for Aerospace Engineering

基　　金：国家自然科学基金项目(51505208)资助

摘　　要：为对718镍合金切削过程加工表面晶粒细化和微硬度变化较为准确的仿真预测,首先将仿真与实验对比,选取一组最佳的本构模型参数,其次通过有限元校准法对仿真过程的相应物理参数进行优化,使得仿真的相关参数达到最优,并通过对Deform-2D进行二次开发,运用Zener-Hollomon方程对718镍合金正交切削过程中动态再结晶过程仿真,运用Hall-Petch方程对加工表面和次表面微硬度变化仿真,最终得到了718镍合金正交切削过程加工表面晶粒尺寸和微硬度的变化,为718镍合金表面加工质量的评估提供了较为可靠的依据。In order to predict the microstructure change and the micro-hardness change in the cutting process of Inconel 718,the simulation results were compared with the experimental and the best parameters of J-C model for Inconel 718 were found,and then the FEM calibration was furtherly used to calibrate the other physics parameters to make the simulations more perfect. The second-development for Deform-2D was made,the grain refinement was simulated via Zener-Hollomon equation,and the micro-hardness was simulated via Hall-Petch equation. Finally,the microstructure and micro-hardness were simulated in the cutting process of Inconel 718,and the corresponding results can provide reliable judgement for the cutting surface property of Inconel 718.

关 键 词：718镍合金 微观结构 微观硬度 有限元 切削 

分 类 号：TH128[机械工程—机械设计及理论]